DEV Community

Cover image for Install KUBERNETES (EKS-D)
Anderson Gama
Anderson Gama

Posted on • Edited on

Install KUBERNETES (EKS-D)

#eks #ubuntu #snap #kubernetes

Install KUBERNETES (EKS-D)

OS: UBUNTU

Install Kubectl 

sudo snap install kubectl --classic
Enter fullscreen mode Exit fullscreen mode

Install Amazon EKS Distro (EKS-D) 

sudo snap install eks --classic --edge
Enter fullscreen mode Exit fullscreen mode 
eks (1.18/edge) v1.18.9 from Canonical✓ installed
Enter fullscreen mode Exit fullscreen mode

Check the status 

eks status --wait-ready
Enter fullscreen mode Exit fullscreen mode 
eks is running
high-availability: no
  datastore master nodes: 127.0.0.1:19001
  datastore standby nodes: none
Enter fullscreen mode Exit fullscreen mode

Give execution permission to the current user 

sudo usermod -a -G eks $USER
sudo chown -f -R $USER ~/.kube
Enter fullscreen mode Exit fullscreen mode

Export the current EKS-D configuration information for use with Kubectl 

mkdir -p $HOME/.kube
sudo eks config > .kube/config
Enter fullscreen mode Exit fullscreen mode

Inspect the installation 

eks inspect | grep running
Enter fullscreen mode Exit fullscreen mode 
  Service snap.eks.daemon-cluster-agent is running
  Service snap.eks.daemon-containerd is running
  Service snap.eks.daemon-apiserver is running
  Service snap.eks.daemon-apiserver-kicker is running
  Service snap.eks.daemon-control-plane-kicker is running
  Service snap.eks.daemon-proxy is running
  Service snap.eks.daemon-kubelet is running
  Service snap.eks.daemon-scheduler is running
  Service snap.eks.daemon-controller-manager is running
Enter fullscreen mode Exit fullscreen mode

Check the version of Containerd 

eks ctr --version
Enter fullscreen mode Exit fullscreen mode 
ctr github.com/containerd/containerd v1.3.7
Enter fullscreen mode Exit fullscreen mode

Server / Client version 

eks ctr version
Enter fullscreen mode Exit fullscreen mode 
Client:
  Version:  v1.3.7
  Revision: 8fba4e9a7d01810a393d5d25a3621dc101981175

Server:
  Version:  v1.3.7
  Revision: 8fba4e9a7d01810a393d5d25a3621dc101981175
  UUID: 339017b3-570e-43bd-a528-4a08123868ca
Enter fullscreen mode Exit fullscreen mode

Access Kubernetes

EKS-D comes with its own version of Kubectl to access Kubernetes. Below we will cover 2 different forms of access to view the "nodes" and "services":

Conventional

eks kubectl get nodes
Enter fullscreen mode Exit fullscreen mode 
NAME           STATUS   ROLES    AGE   VERSION
myuser         Ready    <none>   33m   v1.18.9-eks-1-18-1
Enter fullscreen mode Exit fullscreen mode 
eks kubectl get services
Enter fullscreen mode Exit fullscreen mode 
NAME         TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)   AGE
kubernetes   ClusterIP   10.152.183.1   <none>        443/TCP   33m
Enter fullscreen mode Exit fullscreen mode

Recommended

kubectl get nodes
Enter fullscreen mode Exit fullscreen mode 
NAME           STATUS   ROLES    AGE   VERSION
myuser         Ready    <none>   33m   v1.18.9-eks-1-18-1
Enter fullscreen mode Exit fullscreen mode 
kubectl get services
Enter fullscreen mode Exit fullscreen mode 
NAME         TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)   AGE
kubernetes   ClusterIP   10.152.183.1   <none>        443/TCP   33m
Enter fullscreen mode Exit fullscreen mode

Note: As shown, the 2 forms have the same result, but from this point on we will only use the "Recommended" with Kubectl.

Deploy a test application 

kubectl create deployment nginx --image=nginx
Enter fullscreen mode Exit fullscreen mode 
deployment.apps/nginx created
Enter fullscreen mode Exit fullscreen mode 
kubectl get pods
Enter fullscreen mode Exit fullscreen mode 
NAME                    READY   STATUS    RESTARTS   AGE
nginx-f89759699-2w75l   1/1     Running   0          33s
Enter fullscreen mode Exit fullscreen mode

Starting and stopping EKS-D

EKS-D will continue to run until you decide to stop it. You can stop and start with the commands below:

sudo eks stop
Enter fullscreen mode Exit fullscreen mode 
Stopped.
Enter fullscreen mode Exit fullscreen mode 
sudo eks start
Enter fullscreen mode Exit fullscreen mode 
Started.
Enter fullscreen mode Exit fullscreen mode

Basic information of your Kubernetes cluster

Server/Client version 

kubectl version --short=true
Enter fullscreen mode Exit fullscreen mode 
Client Version: v1.19.4
Server Version: v1.18.9-1+c787d4d0c397b8
Enter fullscreen mode Exit fullscreen mode

Cluster information 

kubectl cluster-info
Enter fullscreen mode Exit fullscreen mode 
Kubernetes master is running at https://192.168.254.100:16443
CoreDNS is running at https://192.168.254.100:16443/api/v1/namespaces/kube-system/services/kube-dns:dns/proxy
Metrics-server is running at https://192.168.254.100:16443/api/v1/namespaces/kube-system/services/https:metrics-server:/proxy
Enter fullscreen mode Exit fullscreen mode

Configuration information 

kubectl config view
Enter fullscreen mode Exit fullscreen mode 
apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: DATA+OMITTED
    server: https://192.168.254.100:16443
  name: microk8s-cluster
contexts:
- context:
    cluster: microk8s-cluster
    user: admin
  name: microk8s
current-context: microk8s
kind: Config
preferences: {}
users:
- name: admin
  user:
    token: REDACTED
Enter fullscreen mode Exit fullscreen mode

Note: To view the access token, use the "--flatten=true" option.

View the nodes 

kubectl get nodes -w
Enter fullscreen mode Exit fullscreen mode 
NAME           STATUS   ROLES    AGE   VERSION
myuser         Ready    <none>   33h   v1.18.9-eks-1-18-1
Enter fullscreen mode Exit fullscreen mode

Information about a particular node 

kubectl describe node myuser
Enter fullscreen mode Exit fullscreen mode

Source:

https://microk8s.io/

https://microk8s.io/docs/commands

https://snapcraft.io/eks

https://snapcraft.io/kubectl

https://ubuntu.com/blog/install-amazon-eks-distro-anywhere

Top comments (0)

Read next

afiqiqmal profile image

Installing Supervisor On Amazon Linux 2023

Hafiq Iqmal -

josephibehdev profile image

Step-by-Step Guide: Setting Up Apache2 and Deploying an HTML Template on Ubuntu (Using Vagrant on a Local Machine)

Joseph Ibeh -

dilanka-rathnasiri profile image

Kubernetes Pods

Dilanka Rathnasiri -

akhil_mittal profile image

How to Secure Your AWS EKS Application with OAuth 2.0 and SSO Integration Using Amazon Cognito and OAuth2-Proxy

akhil mittal -