This blog will take you through connecting the SuperTokens core service with a MySQL or a PostgreSQL database with and without Docker.
This is only applicable if you are self-hosting the SuperTokens core service.
There are several methods for how you might want to run SuperTokens along with a database. In this blog, we will cover:
- 1) Running with MySQL:
- a) Running SuperTokens and MySQL without docker
- b) Running SuperTokens with Docker and MySQL without docker
- c) Running SuperTokens without Docker and MySQL with docker
- d) Running SuperTokens and MySQL with docker, but without docker-compose
- e) Running SuperTokens and MySQL with docker, with docker-compose
- 2) Running with PostgreSQL:
- a) Running SuperTokens and PostgreSQL without docker
- b) Running SuperTokens with Docker and PostgreSQL without docker
- c) Running SuperTokens without Docker and PostgreSQL with docker
- d) Running SuperTokens and PostgreSQL with docker, but without docker-compose
- e) Running SuperTokens and PostgreSQL with docker, with docker-compose
Please feel free to navigate to the correct section based on your setup. In each section, we will be linking to the SuperTokens documentation wherever applicable so that this blog is not very lengthy.
All the sections below assume that you will be using a Linux based operating system. For Windows, the syntax for some of the steps might be different, but the overall steps that need to be performed will be the same.
1a) Running SuperTokens and MySQL without docker
- Install SuperTokens on your local machine by following the self-hosted, without docker, instructions in the SuperTokens’ documentation.
- Connect to the MySQL server on your local machine and create a database for SuperTokens to write to:
create database supertokens;
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a MySQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER 'supertokens_user'@'localhost' IDENTIFIED BY 'somePassword';
GRANT ALL ON supertokens.* TO 'supertokens_user'@'localhost';
FLUSH PRIVILEGES;
Notice that we only allow this user to work via 'localhost'
. This would only work if the SuperTokens core is running locally as well. If you are running the core in a different location, then you would need to replace 'localhost'
in the above with '%'
.
- Edit the SuperTokens
config.yaml
file (located in/usr/lib/supertokens/config.yaml
) to add the following config:
mysql_connection_uri: "mysql://supertokens_user:somePassword@localhost:3306/supertokens"
Make sure that you put in the right values for the user, password, database name and location of your MySQL instance in the above connection uri string.
- Run SuperTokens by running
supertokens start
on your terminal:
supertokens start
Loading storage layer.
Loading MySQL config.
...
Started SuperTokens on localhost:3567 with PID: ...
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
1b) Running SuperTokens with Docker and MySQL without docker
For this setup to work, we must connect SuperTokens and MySQL via the host machine's network. For this, we will have to expose the MySQL db to the local IP.
- Start by pulling the SuperTokens docker image that is compatible with MySQL:
docker pull registry.supertokens.io/supertokens/supertokens-mysql
- Expose MySQL server to all network interfaces on your machine. To do this, edit the
my.cnf
file (MySQL config file) to include:
bind-address = 0.0.0.0
Be sure to restart your MySQL server after saving the file.
- Connect to the MySQL server on your local machine and create a database for SuperTokens to write to:
create database supertokens;
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a MySQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER 'supertokens_user'@'%' IDENTIFIED BY 'somePassword';
GRANT ALL ON supertokens.* TO 'supertokens_user'@'%';
FLUSH PRIVILEGES;
- Run the SuperTokens docker image with the env var specifying the MySQL connection URI:
docker run \
-p 3567:3567 \
--network=host \
-e MYSQL_CONNECTION_URI="mysql://supertokens_user:somePassword@192.168.1.1:3306/supertokens" \
-d registry.supertokens.io/supertokens/supertokens-mysql
Be sure to replace
192.168.1.1
with the correct IP of your system.
This will start the docker image in the background. You can find it by running:
docker ps
If you want to run it in the foreground, you can remove the -d
option from the docker run
command.
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
1c) Running SuperTokens without Docker and MySQL with docker
Install SuperTokens on your local machine by following the self-hosted, without docker, instructions in the SuperTokens’ documentation.
Start the MySQL docker container:
docker run \
-e MYSQL_ROOT_PASSWORD=root \
-e MYSQL_USER=supertokens_user \
-e MYSQL_PASSWORD=somePassword \
-e MYSQL_DATABASE=supertokens \
--network=host \
-p 3306:3306 \
-d mysql
The above will start the mysql db with a new database called supertokens
. SuperTokens core will store the data in this database. If instead, you want the data to be stored in an existing db, please provide that db's name instead.
- Edit the SuperTokens
config.yaml
file (located in/usr/lib/supertokens/config.yaml
) to add the following config:
mysql_connection_uri: "mysql://supertokens_user:somePassword@localhost:3306/supertokens"
Make sure that you put in the right values for the user, password, database name and location of your MySQL instance in the above connection uri string.
- Run SuperTokens by running
supertokens start
on your terminal:
supertokens start
Loading storage layer.
Loading MySQL config.
...
Started SuperTokens on localhost:3567 with PID: ...
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
1d) Running SuperTokens and MySQL with docker, but without docker-compose
- Start by pulling the SuperTokens docker image that is compatible with MySQL:
docker pull registry.supertokens.io/supertokens/supertokens-mysql
- Start the MySQL docker container:
docker run \
-e MYSQL_ROOT_PASSWORD=root \
-e MYSQL_USER=supertokens_user \
-e MYSQL_PASSWORD=somePassword \
-e MYSQL_DATABASE=supertokens \
--network=host \
-p 3306:3306 \
-d mysql
The above will start the mysql db with a new database called supertokens
. SuperTokens core will store the data in this database. If instead, you want the data to be stored in an existing db, please provide that db's name instead.
- Run the SuperTokens docker image with the env var specifying the MySQL connection URI:
docker run \
-p 3567:3567 \
--network=host \
-e MYSQL_CONNECTION_URI="mysql://supertokens_user:somePassword@192.168.1.1:3306/supertokens" \
-d registry.supertokens.io/supertokens/supertokens-mysql
Be sure to replace
192.168.1.1
with the correct IP of your system.
This will start the docker image in the background. You can find it by running:
docker ps
If you want to run it in the foreground, you can remove the -d
option from the docker run
command.
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
1e) Running SuperTokens and MySQL with docker, with docker-compose
- Use the following docker compose file. You can call it
docker-compose.yaml
version: '3'
services:
db:
image: mysql:latest
environment:
MYSQL_ROOT_PASSWORD: root
MYSQL_USER: supertokens_user
MYSQL_PASSWORD: somePassword
MYSQL_DATABASE: supertokens
ports:
- 3306:3306
networks:
- app_network
restart: unless-stopped
healthcheck:
test: [ "CMD", "mysqladmin", "ping", "-h", "localhost" ]
timeout: 20s
retries: 10
supertokens:
image: registry.supertokens.io/supertokens/supertokens-mysql
depends_on:
- db
ports:
- 3567:3567
environment:
MYSQL_CONNECTION_URI: mysql://supertokens_user:somePassword@db:3306/supertokens
networks:
- app_network
restart: unless-stopped
healthcheck:
test: >
bash -c 'exec 3<>/dev/tcp/127.0.0.1/3567 && echo -e "GET /hello HTTP/1.1\r\nhost: 127.0.0.1:3567\r\nConnection: close\r\n\r\n" >&3 && cat <&3 | grep "Hello"'
interval: 10s
timeout: 5s
retries: 5
networks:
app_network:
driver: bridge
- You can run the following command to start the service:
docker-compose up
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
2a) Running SuperTokens and PostgreSQL without docker
- Install SuperTokens on your local machine by following the self-hosted, without docker, instructions in the SuperTokens’ documentation.
- Connect to the PostgreSQL server on your local machine and create a database for SuperTokens to write to:
CREATE DATABASE supertokens;
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a PostgreSQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER supertokens_user WITH ENCRYPTED PASSWORD 'somePassword';
GRANT ALL PRIVILEGES ON DATABASE supertokens TO supertokens_user;
- Edit the SuperTokens
config.yaml
file (located in/usr/lib/supertokens/config.yaml
) to add the following config:
postgresql_connection_uri: "postgresql://supertokens_user:somePassword@localhost:5432/supertokens"
Make sure that you put in the right values for the user, password, database name and location of your postgreSQL instance in the above connection uri string.
- Run SuperTokens by running supertokens start on your terminal:
supertokens start
Loading storage layer.
Loading PostgreSQL config.
...
Started SuperTokens on localhost:3567 with PID: ...
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
2b) Running SuperTokens with Docker and PostgreSQL without docker
For this setup to work, we must connect SuperTokens and PostgreSQL via the host machine’s network. For this, we will have to allow PostgreSQL to allow incomming client connections over the network.
- Start by pulling the SuperTokens docker image that is compatible with PostgreSQL:
docker pull registry.supertokens.io/supertokens/supertokens-postgresql
- Allow incoming client connections to your PostgreSQL database over your network by adding the following lines to the
postgresql.conf
andpg_hba.conf
file.
postgresql.conf
listen_addresses = '0.0.0.0'
pg_hba.conf
host all all 0.0.0.0/0 md5
- Connect to the PostgreSQL server on your local machine and create a database for SuperTokens to write to:
CREATE DATABASE supertokens;
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a PostgreSQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER supertokens_user with encrypted password 'somePassword';
GRANT ALL PRIVILEGES ON DATABASE supertokens TO supertokens_user;
- Run the SuperTokens docker image with the env var specifying the PostgreSQL connection URI:
docker run \
-p 3567:3567 \
--network=host \
-e POSTGRESQL_CONNECTION_URI="postgresql://supertokens_user:somePassword@192.168.1.1:5432/supertokens" \
-d registry.supertokens.io/supertokens/supertokens-postgresql
Be sure to replace
192.168.1.1
with the correct IP of your system.
This will start the docker image in the background. You can find it by running:
docker ps
If you want to run it in the foreground, you can remove the -d
option from the docker run
command.
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
2c) Running SuperTokens without Docker and PostgreSQL with docker
Install SuperTokens on your local machine by following the self-hosted, without docker, instructions in the SuperTokens’ documentation.
Start the PostgreSQL docker container:
docker run \
-e POSTGRES_USER=root \
-e POSTGRES_PASSWORD=root \
--network=host \
-p 5432:5432 \
-d postgres \
-c listen_addresses=0.0.0.0
The above will start the PostgreSQL db. You will need to connect to the database and create a user with the privileges.
```sql
CREATE DATABASE supertokens;
```
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a PostgreSQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER supertokens_user with encrypted password 'somePassword';
GRANT ALL PRIVILEGES ON DATABASE supertokens TO supertokens_user;
- Edit the SuperTokens
config.yaml
file (located in/usr/lib/supertokens/config.yaml
) to add the following config:
postgresql_connection_uri: "postgresql://supertokens_user:somePassword@localhost:5432/supertokens"
Make sure that you put in the right values for the user, password, database name and location of your PostgreSQL instance in the above connection uri string.
- Run SuperTokens by running
supertokens start
on your terminal:
supertokens start
Loading storage layer.
Loading PostgreSQL config.
...
Started SuperTokens on localhost:3567 with PID: ...
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
2d) Running SuperTokens and PostgreSQL with docker, but without docker-compose
- Start by pulling the SuperTokens docker image that is compatible with PostgreSQL:
docker pull registry.supertokens.io/supertokens/supertokens-postgresql
- Start the PostgreSQL docker container:
docker run \
-e POSTGRES_USER=root \
-e POSTGRES_PASSWORD=root \
--network=host \
-p 5432:5432 \
-d postgres \
-c listen_addresses=0.0.0.0
The above will start the PostgreSQL db. You will need to connect to the database and create a user with the privileges.
```sql
CREATE DATABASE supertokens;
```
If you already have a database for your application and want SuperTokens to create tables in that, you can skip this step.
- Create a PostgreSQL user that has full access to the database created in the previous step. This user will be used by SuperTokens to create and write to the database tables:
CREATE USER supertokens_user with encrypted password 'somePassword';
GRANT ALL PRIVILEGES ON DATABASE supertokens TO supertokens_user;
- Run the SuperTokens docker image with the env var specifying the PostgreSQL connection URI:
docker run \
-p 3567:3567 \
--network=host \
-e POSTGRESQL_CONNECTION_URI="postgresql://supertokens_user:somePassword@192.168.1.1:5432/supertokens" \
-d registry.supertokens.io/supertokens/supertokens-postgresql
Be sure to replace
192.168.1.1
with the correct IP of your system.
This will start the docker image in the background. You can find it by running:
docker ps
If you want to run it in the foreground, you can remove the -d
option from the docker run
command.
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
## 2e) Running SuperTokens and PostgreSQL with docker, with docker-compose
- Use the following docker compose file. You can call it
docker-compose.yaml
version: '3'
services:
db:
image: 'postgres:latest'
environment:
POSTGRES_USER: supertokens_user
POSTGRES_PASSWORD: somePassword
POSTGRES_DB: supertokens
ports:
- 5432:5432
networks:
- app_network
restart: unless-stopped
healthcheck:
test: ['CMD', 'pg_isready -U supertokens_user']
interval: 5s
timeout: 5s
retries: 5
supertokens:
image: registry.supertokens.io/supertokens/supertokens-postgresql
depends_on:
- db
ports:
- 3567:3567
environment:
POSTGRESQL_CONNECTION_URI: "postgresql://supertokens_user:somePassword@db:5432/supertokens"
networks:
- app_network
restart: unless-stopped
healthcheck:
test: >
bash -c 'exec 3<>/dev/tcp/127.0.0.1/3567 && echo -e "GET /hello HTTP/1.1\r\nhost: 127.0.0.1:3567\r\nConnection: close\r\n\r\n" >&3 && cat <&3 | grep "Hello"'
interval: 10s
timeout: 5s
retries: 5
networks:
app_network:
driver: bridge
- You can run the following command to start the service:
docker-compose up
- Verify that it is setup correctly by querying the core service:
curl http://localhost:3567/hello
If you get back a Hello
reply, the core setup is done!
Top comments (0)