⚡️ Create your first GitHub action in 6 minutes

Introduction

Hello, DEV community! 😉 New day and new useful information about GitHub Actions. Earlier, we figured out how to build & deploy a static 11ty website to remote virtual server after pushing and, I hope, you've learned the principles I set out in that article.

Using ready-made GitHub Actions from Marketplace is good, but... what if they are not available or/and your configuration is too specific?

That's right! 👌 Let's write your own first action.

📝 Table of contents

• The basis for the example
• GitHub action basics
  • action.yml
  • Dockerfile
  • entrypoint.sh
  • Other files & folders
• Documentation
• Publish action to GitHub Marketplace
  • Final result
• Questions for better understanding
• Exercises for independent execution

The basis for the example

Let's take GitHub action, what I created for build Sapper-based website:

koddr / actions-sapper

:octocat: GitHub Action for generating a static website with Sapper.

GitHub Action for Sapper

Use this action to build your static website with Sapper.

☝️ How to use?

To use it, create a .github/workflows/sapper_build.yml file in your Sapper-based website repository as an action.

📌 Tip: read this article to more understand GitHub Actons steps.

⚙️ Inputs

This action accepts a couple of optional inputs:

Input Name	Required?	Default	Description
build_mode	No	"export"	Build mode to the Sapper
args	No	none	Arguments to pass to the Sapper invocation

For example:

- name: Build
  uses: truewebartisans/actions-sapper@master
  with:
    build_mode: "export"
    args: "--legacy --entry about"

👀 More complex examples

These are examples, which builds the website with this action, then deploys with another action.

💡 Deploy to GitHub Pages

• Deploy action: peaceiris/actions-gh-pages

name: Build Sapper and Deploy to GitHub Pages
on: [push]

jobs:
  build_deploy:
    runs-on: ubuntu-latest
    steps:

…

View on GitHub

GitHub action basics

Usually, the structure of a project for GitHub action, looks like this:

.
├── .gitignore
├── .github
│   ├── gh-cover.png
│   └── workflows
│       └── test_deploy.yml
├── action.yml
├── Dockerfile
├── entrypoint.sh
├── LICENSE
└── README.md

Now, let's take apart the most basic files. In the code samples below, I specifically separated sections and marked them to make it easier to read.

But, you may not do this in your actions... 😏

↑ Table of contents

├── action.yml

This is the settings file for the action.

# Action's main info
name: "Sapper Action"
description: "Build your Sapper-based static website"

# Action's author name
author: "Vic Shóstak"

# Action's branding data for GitHub Marketplace
# See docs: [1]
branding:
  icon: "package" # icon name from Feather open source icons pack
  color: "blue"

# Action's inputs (options)
# See docs: [2]
inputs:

  # First input (option) name
  # See docs: [3]
  build_mode:

    # Input's description
    description: "Build mode to the Sapper (could be `build` or `export`, by default `export`)"

    # Specify, if this input is required to define
    required: false

    # Input's default value
    default: "export"

  # Second input (option) name
  args:
    description: "Arguments to pass to the Sapper invocation (by default `--legacy`)"
    required: false
    default: "--legacy"

# Configures the image (used for the Docker action)
# See docs: [4]
runs:

  # Use Docker to run the action 
  using: "docker"

  # The Docker image to use as the container to run the action
  # or path to 'Dockerfile' with settings
  image: "Dockerfile"

🔗 Links to docs: [1], [2], [3], [4].

↑ Table of contents

├── Dockerfile

Yeah, as you have already understood, this is a regular Dockerfile with container settings (the same as you usually use in your projects):

# Select the Docker image
FROM node:10-alpine

# Copy `entrypoint.sh` file to container's root
COPY entrypoint.sh /

# Set permissions for `entrypoint.sh` file execution 
RUN chmod +x /entrypoint.sh

# Define an entrypoint to be called after the container is created
ENTRYPOINT ["/entrypoint.sh"]

☝️ Tip: please read The Best practices for writing Dockerfiles here.

↑ Table of contents

├── entrypoint.sh

The entrypoint, wich will be called after the container is created. In our case, it's just a simple bash script.

#!/bin/sh

echo "Running \`npm install\`"
npm install

echo "Build Sapper"
npx sapper $INPUT_BUILD_MODE $INPUT_ARGS

Pay attention, $INPUT_BUILD_MODE is equal to inputs.build_mode in actions.yml file and the same logic also applies to $INPUT_ARGS (inputs.args). In other words, all variables, that you would allow for definition to your users should be defined as $INPUT_<OPTION_NAME>.

Conditional operator example

If some variable is specific, you can define it with a boolean variable in action.yml and then, check in entrypoint.sh.

• Specify a new input for inputs section into action.yml:

# ...

inputs: 
  npm_install:
    description: 'If set to `true`, `npm install` will be run'
    required: false
    default: false

# ...

☝️ Tip: it doesn't matter, what case the variable name is in action.yml file, but there should be either only uppercase or only lowercase letters!

• And now, just add if...then section to entrypoint.sh:

#!/bin/sh

if [ "$INPUT_NPM_INSTALL" = "true" ]; then
  echo "Running \`npm install\`"
  npm install
fi

# ...

↑ Table of contents

Other files & folders

• .github/workflows/test_build.yml — test for your action (optional).
• .github/gh-cover.png — cover image for preview, like this:

↑ Table of contents

Documentation

Documentation and usage examples in README.md are the most important parts of your GitHub action. Because, your action (possibly) will be used by other developers! Always remember that, when you create a new action.

Here are some simple rules to help you write really good docs:

• Write a detailed start guide right at the beginning.
• Format all optional values (inputs) in tabular format, following the string structure: Input name, Is required?, Default value, Description.
• Add more examples, especially, if your action can be built into a chain of actions or used only in combination with another GitHub action.

• Add beautiful and understandable image cover for preview of your GitHub repository. This is also important, because when people sharing link of your GitHub action, will see an attractive preview that can create a great conversion!

☝️ Tip: You can download a special template (with safe indents) to create a cover image for preview of your repository.

• (advanced) Add a demo repository with an example of how to apply your GitHub action, such as I did for action of this example:

koddr / actions-sapper-demo

👀 Demo for Sapper Action.

↑ Table of contents

Publish action to GitHub Marketplace

Okay! 👍 We are now fully ready to publish your first action to the GitHub Actions Marketplace.

1. Go to Releases page in your repository and draft new release.
2. Check Publish this Action to the GitHub Marketplace.
3. GitHub will check all the files related to the action and will show warnings, if something doesn't comply with best practices or/and community agreements.
4. Add Security contact email.
5. Add Primary and Secondary action categories.
6. Specify tag version (use a Semantic versioning), title and description.
7. Click Publish release.

If you did everything right, then on the main page of your repository will be added a badge with an invitation to view this action on the GitHub Marketplace:

↑ Table of contents

Final result

In fact, that's it! 😎 You have just created your first GitHub action, written excellent documentation for it and published it on the Marketplace.

🎉 Congratulations! We did it!

↑ Table of contents

💬 Questions for better understanding

1. In what case should you write the name of each input?
2. Which collection of icons does GitHub Actions use for branding section on action.yml file?
3. What are the best practices, when selecting a tag for a release version?
4. How can you define environment variables in input? Read this section in the GitHub Actions docs.

↑ Table of contents

✏️ Exercises for independent execution

• Try to repeat everything you have seen in the article, but with your own action. Please, write about your results in the comments to this article!
• Change color and icon of your action at GitHub Marketplace.

↑ Table of contents

Photos/Images by

• GitHub Actions promo website (link)
• GitHub repository settings (link)
• True web artisans actions-sapper repository (link)

P.S.

If you want more articles (like this) on this blog, then post a comment below and subscribe to me. Thanks! 😻

❗️ You can support me on Boosty, both on a permanent and on a one-time basis. All proceeds from this way will go to support my OSS projects and will energize me to create new products and articles for the community.

And of course, you can help me make developers' lives even better! Just connect to one of my projects as a contributor. It's easy!

My main projects that need your help (and stars) 👇

• 🔥 gowebly: A next-generation CLI tool that makes it easy to create amazing web applications with Go on the backend, using htmx, hyperscript or Alpine.js and the most popular CSS frameworks on the frontend.
• ✨ create-go-app: Create a new production-ready project with Go backend, frontend and deploy automation by running one CLI command.

Other my small projects: yatr, gosl, json2csv, csv2api.